Therealstig
Member Since: 05 Nov 2014
Location: Leeds
Posts: 4
  
|
| Disco 4 Commercial rear seat alternatives |
|
Hello everyone,
This is my first post so please accept my apologys if this has been covered before...
I have recently upgraded from Freelander 2 commercial to Disco 4 commercial  & had previously acquired a set of rear seats to fit the Freelander without problem, however the same cannot be said for the Disco 
So the question is are there alternatives that could fit (without major fabrication) other than the 'Scott seat' or 'Atlantech' conversions.
Will the LR2 seats go in with minor mods or others from the Landrover/Rangerover range?
I am fairly adept with the spanners so the installation shouldn't be an issue, just don't want to have to go to extremes!
Any info greatly appreciated.
thanks.
|
 17th Dec 2014 2:22 pm |
|
|
CDS
Site Sponsor
Member Since: 12 Oct 2009
Location: All over the UK!
Posts: 3324
 
|
Welcome 
Site Sponsors on here 'MMJ' might have some??
Discovery 3/4 & RRS keys cut and programmed at your home or work
Apple CarPlay/ Android Auto retro fit - see it here
BAS Remaps/ EGR Blanking
Software updates/ enabling
Mobile Servicing & Repairs
|
| 17th Dec 2014 2:33 pm |
|
|
Inigo
Member Since: 28 Feb 2012
Location: Kent
Posts: 271
|
I've almost finished fitting a set of rear seats, supplied by Brad of Yeovil Land Rover (site sponsor). Only hold up now is trying to get the right connectors for heated seats.
It took a couple of goes to get all the bits, and be warned they come as individual bits (frames, foam, leather, bolts, plastic, etc), but Brad should now have a comprehensive list of all of the required part numbers.
It took me a long time and quite a lot of skin lost to get these in. I found some complete sets from a Disco 3 from breakers that would be quicker to just add in, but I wanted to know that they would be in good nick. As a plus, I now know more about how car seats are put together than I really wanted to.
|
| 17th Dec 2014 2:59 pm |
|
|
