Member Since: 06 Jan 2013
Location: nairobi
Posts: 11
Disco 3 Automatic Wont Start - P0705 transmission Range
i was recovering my disco 2 using my disco 3
parked both vehicles at home
tried to start the disco 3 - it wont start:shock:
says
Transmission fault F gears limited, hdc not available
plugged in my code reader it
gives the following codes
P0705 transmission range sensor a circuit (Park, reverse, neutral, drive low input)
tried to clear it but it reoccurs any help will be highly appreciated
23rd Aug 2014 11:26 pm
SADISCOBOB
Member Since: 08 Oct 2010
Location: Alberton
Posts: 246
Hi there, P0705 - "Transmission range sensor circuit malfunction". Can't help with that BUT, every time I have had "HDC unavailable" it has been due to low voltage battery. A decent charge with a good charger has always sorted that.
Hope this helps Life always good with a Landy
2006 LR DISCO 3 4.4 V8 HSE
DISCO 1 2.8 TDi
DISCO11 TD5
RR CLASSIC 1980 3.5 V8
27th Aug 2014 8:35 am
rommie
Member Since: 06 Jan 2013
Location: nairobi
Posts: 11
i know sometime people post and once an issue is resolved forget to repost to help others
i decided to go against the flow
ok after looking underneath i found out the following
Click image to enlarge
checking on the history of the car
after going to the main stealers for my records i found that the mechanics charged the company for a new gearbox (the car was under warranty) but actually they had tie-wrapped the gear selector cable
So some mechanics were a gearbox richer ! " its Africa I know"
i decide the main stealer wont do my car lest i be minus another gearbox for real this time.
afew cable ties did the trick until i buy the gear selector cable
Click image to enlarge
3rd Nov 2014 7:14 am
rommie
Member Since: 06 Jan 2013
Location: nairobi
Posts: 11
the cable ties seem to hold the Problem even after one month of driving (now i need to fix the leaking Fuel Filter)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum