MrH
Member Since: 08 Aug 2007
Location: lost in the forest
Posts: 7754
|
| Device Error when connectiong via USB or 30-Pin |
|
Ok, tried the obvious ie different i-devices (all work fine in another D4), different cable between i- device and cubby port but all result in the same, after a long while saying "connecting" it comes up with Device Error.
Anyone else had this and know the fix for it? I got it on the list for next service but it would be handy if I had more info for the dealers ie may get it resolved quicker if I can tell them what to look for  LRs are a fond memory, apart from the maintenance.
|
 15th Jul 2015 8:27 pm |
|
|
CUCO
Member Since: 27 May 2011
Location: Spain & Oleee!!!
Posts: 609
  
|
New cubby plug needed, new hardware will cure the issues with lost connection and/or no connection at all.
Mine was faulty and was renewed in warranty.
Check first with another d4 cubby plug, no more than 10 seconds and a flat screwdriver to pry it out to check it. 
(Yours and mine seems to be linked, they are showing same fau.... "behaviour" along time  )
|
| 15th Jul 2015 10:03 pm |
|
|
MrH
Member Since: 08 Aug 2007
Location: lost in the forest
Posts: 7754
|
 they were probably on the production line together.
Yes the connector block in the cubby was my thought but I don't have any tools with me when I swapped leads and devices before. Cheers. LRs are a fond memory, apart from the maintenance.
|
| 16th Jul 2015 9:02 am |
|
|
