TobyB
Member Since: 19 Jun 2021
Location: NEWMARKET
Posts: 14
  
|
With help from many on here I successfully transferred the cool box from my 06 D3 to my 16 D4. It worked fine for a while but developed a 'fluttering' noise when on. I dismantled the mid-console and found it was a manufacturer's paper label near the fan fluttering in the breeze! Huge relief.
I then carefully rebuilt the top of the cubby box and mid-console, testing that everything was working at each stage and no 'fluttering' noises. All went well. Again huge relief!
A couple of days later, just as we left on a week's break (for which the cool box was required) it showed no light on the switch and nothing happened.
I wondered if I might have disconnected it somehow or the fuse had blown. Fuse was fine and when I dismantled the mid-console AGAIN, the connection seemed fine.
I checked that there was power at the end of the supply lead, yes, 12v switched.
But still; no cool box.
Can anybody advise? Is it defunct? Does anybody know anybody with the knowledge and kit to run some diagnostics on it?
I am happy to strip it out AGAIN and send it.
Or do I just replace it with a new one?
 
|
 13th Nov 2021 7:00 pm |
|
|
TobyB
Member Since: 19 Jun 2021
Location: NEWMARKET
Posts: 14
|
bump
|
| 14th Nov 2021 7:18 pm |
|
|
teddy
Member Since: 22 Jul 2017
Location: suffolk
Posts: 72
|
If it's got power but not working, it seems replacement would be the easiest option given that SH units are not particularly expensive. 2010MY Disco 4 HSE in Ipanema Sand over Almond.
It's got THE rear diff.
|
| 16th Nov 2021 9:53 am |
|
|
philm
Member Since: 02 Oct 2016
Location: Manchester
Posts: 732
|
Have a look for Peltier modules, find the size of yours and change it. It's probably that if fan was working correctly. L633 Defender
Range Rover Velar-gone
Discovery 4 Landmark-gone
Gap IID Tool
|
| 16th Nov 2021 10:03 am |
|
|
