Member Since: 04 Aug 2015
Location: mansfield
Posts: 5
how to set clock on dash
hi all i had bodsy put the clock on my 55 plate D3.
i had to take off the battery and now i cant seem to set the clock.
radio is done its just the dash.
2nd May 2017 5:27 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Charge the battery up, then take the battery cables off and hold them together for 20 seconds (you may need a metal something to join them).
then put the cables back on and reset the clock. Will then appear again. I'm guessing that you could only see --/-- on the dashBodsys Brake Bible
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
3rd May 2017 5:14 pm
m8dent
Member Since: 04 Aug 2015
Location: mansfield
Posts: 5
yep --/-- on the dash. i will sort it at the weekend many thanks...
3rd May 2017 6:14 pm
marek
Member Since: 07 Dec 2009
Location: CZ
Posts: 11
I've tried to flash my 05 V8 HSE with the 3 flash indicator SW (don't remember the SW code anymore, I've picked a random one from the Flashtool) and had faced some issues with 2 warning messages coming from Low coolant and park brake even they are fine, so the HW YAH500121 (mine) should be flashed with compatible SW. From the Flashtool available SWs there is no update for my cluster since the original has been issued.
Does anyone know a compatible SW for YAH500121 please?
THX
Marek
27th Jul 2017 1:14 pm
camaroneil
Member Since: 06 Aug 2017
Location: Washington
Posts: 19
Can this mod be done by using the iid bt tool????
Natt
25th Nov 2017 4:27 pm
kajtzu
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6748
Yes, with IID flash IPC with “MY07 for pre-MY07” software image. Then (or before) enable 3-flash in CCF. That’s it.
Edit: update BCM for 3-flash, IID does that too. IPC update gets you the clock.
Last edited by kajtzu on 25th Nov 2017 6:09 pm. Edited 1 time in total
25th Nov 2017 5:50 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73075
3 flash could well need the BCUBCM updated.
Last edited by DSL on 25th Nov 2017 6:14 pm. Edited 1 time in total
25th Nov 2017 6:03 pm
kajtzu
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6748
Very true - BCM update for 3-flash, IPC for dash clock. My bad to mix two things, I was reading the previous post and thinking of the clock (subject) while the gentleman was asking for flash.
25th Nov 2017 6:07 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73075
Deliberate mistake sorted. Well spotted!!
At least I got the first 2 letters right.
25th Nov 2017 6:15 pm
iaizzo
Member Since: 13 Nov 2017
Location: São Paulo
Posts: 4
Hello everyone!
Im new here my name is Leo
I had done the flash YAC 502430 and it worked, but i got an yellow brake light on dash that does not goes away...any idea what to do?
Mine is a 2005 D3 HSE petrol
Tks
27th Nov 2017 3:24 pm
Discogaz
Member Since: 17 Mar 2014
Location: Bracknell
Posts: 1399
Maybe check your brake pads??
27th Nov 2017 3:47 pm
iaizzo
Member Since: 13 Nov 2017
Location: São Paulo
Posts: 4
Hi Discogaz!
I discovered what happened...
i've got an yellow engine light (long story...configuration error on engine management...still there)...
with this firmware, the lights changed place...now the engine light in on brake light.
A friend found two diferent pics from dashes...I will try to upload them
if you look at them both you will see that the engine ligh change place with the brake one (hope you understand my english )
27th Nov 2017 4:40 pm
iaizzo
Member Since: 13 Nov 2017
Location: São Paulo
Posts: 4
Click image to enlarge
Click image to enlarge
27th Nov 2017 4:41 pm
iaizzo
Member Since: 13 Nov 2017
Location: São Paulo
Posts: 4
mine is the lower one...the firmware must be from the upper one
27th Nov 2017 4:42 pm
Ab10a6
Member Since: 07 Jun 2018
Location: Worthing
Posts: 3
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
)
