Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
D4 with face lift afs headlights retrofit done
Just a heads up for people that today I have finally completed the afs retrofit
I started off with halogens and have now fitted 2015 facelift headlights to my 2010 d4
And all the static bending and self levelling is working perfectly have had to add wiring and a hcm and hours playing with the iid tool on several different settings and working perfect as if it was done at the factory in a HsEDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
1st Sep 2018 6:37 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Another thing I have noticed is that the
Cornering lights no longer need a indicator and come on when turning a corner regardless if using a indicatorDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
1st Sep 2018 10:13 pm
Maxxed_Ross
Member Since: 14 Mar 2018
Location: Bathgate
Posts: 310
my 2013 didn't have corner lights, but the new 2014 light units (non AFS) do.
I've noticed that they do work, but only when the indicator is also on. What setting did you turn on to get them to light up without them? I assume this is only at low speeds over a certain steering angle?2013 Discovery 4 HSE Lux | 2001 Defender 90 TD5 | 2007 Prodrive RB320
2nd Sep 2018 5:32 am
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
You carnt u less they are afs headlights and you wire in the hcm for them then that takes overDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
2nd Sep 2018 10:24 am
Maxxed_Ross
Member Since: 14 Mar 2018
Location: Bathgate
Posts: 310
ah that makes sense 2013 Discovery 4 HSE Lux | 2001 Defender 90 TD5 | 2007 Prodrive RB320
2nd Sep 2018 11:20 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
I must admit now there much better as as soon as u go around the slightest bend the main lights bend and the cornering light for the side you are going automatically comes on with no indicator so much better nowDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
3rd Sep 2018 7:30 am
tomsquad419
Member Since: 07 Feb 2018
Location: Atlanta, GA
Posts: 100
I have a 2012 lr4 Lux USA spec. Could I get the cornering lights to work on mine? I have done 2014+ headlight upgrade. Headlights have adaptive.
25th Oct 2018 1:03 am
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
To get the adaptiive lights to work you need to add 14 wires to the car and lights
Then the cornering lights would
Work off the steering angle censor
Other wise you can enable to cornering lights in the ccf with a iid tool and the cornering lights will work off the indicatorDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
25th Oct 2018 7:21 am
Littlewill
Member Since: 14 Sep 2015
Location: Lincolnshire
Posts: 484
Prehaps a silly question James but one worth asking I guess. If the 2016 headlights have been fitted as part of a Discovery 3 front end upgrade would it be possible to get the cornering lights to work also?
25th Oct 2018 8:48 am
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Cornering lights yes by enabling in the ccf as long as wiring is there in the headlight wiring plug which should be (see below pin 4)
and will work only when indicator is on and in drive as a d3 hse has cornering lights
afs and levelling would never work as controlled differently between the two vehiclesDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
25th Oct 2018 9:19 am
Hairy47
Member Since: 13 Jul 2017
Location: Bradford
Posts: 277
Hi, just to butt in.
My D3 se is xenon and when 2015 xenon plugged in I got cornering lights activated but if I remember correctly I also got an error up on dash although I could have tried to activate afl also
25th Oct 2018 10:10 am
Littlewill
Member Since: 14 Sep 2015
Location: Lincolnshire
Posts: 484
Hi,
I have my D4 Xeon headlights on the bench now how do I know if they have the cornering light fitted? Is there something I should be looking for? I have activiated the cornering lights but nothings happened
25th Oct 2018 10:12 am
Famousfive
Member Since: 12 Aug 2014
Location: Southampton
Posts: 1806
You'll only have cornering lights on the MY14 units if you have AFS and it will say that on the label. You can see the cornering led lamp on the edge of a PCB board if you look closely Stolen - D4 Loire Blue
D4 Bali Blue
25th Oct 2018 10:31 am
Littlewill
Member Since: 14 Sep 2015
Location: Lincolnshire
Posts: 484
Hi thanks for that.
This is the label I have on the lights
25th Oct 2018 10:39 am
Littlewill
Member Since: 14 Sep 2015
Location: Lincolnshire
Posts: 484
Also whilst fiddling about I found this plug tucked under the bumper under the passanger side headlight anyone know what its for?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
