Member Since: 11 May 2024
Location: Wiltshire
Posts: 9
Crank Case breather pipe
Having great fun trying to remove the pipe from the rear of the crank case breather. The clips is the squeeze to bits to together type and there is absolutely no room in that area. I was hoping the pipe would be long enough to reach the clip once the breather was actually in the engine bay but the pipe isnt long enough.
I could resort to a junior hacksaw and fit a new clip later but don't want to damage the pipe.
Anyone any tips on how to get this clip off.?
Thanks
Dave
30th Nov 2024 5:07 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5065
If it's the hose clamp I think you're referring to there is a special tool for releasing them, but usually something like a water pump pliers can often do the job.
The tool looks like this which allows for remote operation but there are other versions.
yµ (idµ - eAµ) ψ=mψ
30th Nov 2024 6:24 pm
Yorkie064
Member Since: 11 May 2024
Location: Wiltshire
Posts: 9
Prof SR G
Ah I see Thanks I will see if I can ,locate such a tool.
Thanks
Dave
3rd Dec 2024 6:16 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10735
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
