Member Since: 24 Feb 2011
Location: Gloucestershire
Posts: 509
Cracked Fog Light Lens
Hi all, I managed to crack the NS fog light last weekend whilst in the Brecons. Does anyone know if the lens is replaceable without replacing the whole unit ?
Does anyone have a breakdown diagram for the removal of the fog light ?D4 SDV6 HSE 11MY - Gone
D3 TDV6 HSE 08MY - Gone
8th May 2013 12:27 pm
WOODY179
Member Since: 01 Jun 2005
Location: Chesterfield
Posts: 3634
Unfortunately, you will need to replace the whole unit.
8th May 2013 12:33 pm
dangerdave
Member Since: 23 Nov 2010
Location: <>
Posts: 4495
Admin note: post content removed at user request
8th May 2013 12:35 pm
CUCO
Member Since: 27 May 2011
Location: Spain & Oleee!!!
Posts: 609
Same unit that Ford focus previous version mounts. Ford focus ones are cheaper.
8th May 2013 1:23 pm
azurar01
Member Since: 24 Feb 2011
Location: Gloucestershire
Posts: 509
Cheers
I will have to look at get a whole unit sorted out.D4 SDV6 HSE 11MY - Gone
D3 TDV6 HSE 08MY - Gone
8th May 2013 7:16 pm
steveraspberry
Member Since: 18 Sep 2011
Location: Nr Sevenoaks,Kent
Posts: 2081
Is it worth giving TLO a shout? I'm sure he's got to be the best bet if you want OEM?
My17 Volvo XC90 Inscription
MY15 Mitsubishi L200 Barbarian
RGK Tiga Fx Wheelchair,
Large Alsation called Abbs
Medium blue Staffie called Piglet
Medium Alsation called Bailey
9th May 2013 8:24 am
azurar01
Member Since: 24 Feb 2011
Location: Gloucestershire
Posts: 509
Thanks to TLO for sorting out a replacement fog lamp.
On inspecting the replacement I noticed what looks like an adjuster on the left in the pictures.
Click image to enlarge
Click image to enlarge
I cannot see any markings (E.g. left / right).
Does anyone know whether this is a left / right adjuster and as such needs to be set before fixing ?
Member Since: 24 Feb 2011
Location: Gloucestershire
Posts: 509
Update
OK I decided to take to old unit out over lunch time. So pulled off the fog light surround (spring clips, easier if you start from the edge of the vehicle and pull with your nails under the lip).
Then undid the three screws (T20 torx) that hold the unit in. I swapped the bulbs over and replaced the new unit.
I played with the old unit adjuster, and found it adjusts the beam up / down. Clockwise adjustment raises the beam.
After a few adjust, refit, check and remove actions, the beam is aligned similar to the other side.D4 SDV6 HSE 11MY - Gone
D3 TDV6 HSE 08MY - Gone
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
