Terryok
Member Since: 30 Jun 2018
Location: Kent
Posts: 6
|
coolant coming from bottom of webasto |
|
Have had a search but can't find anything on this but I have a slow coolant leak coming from bottom of the webasto unit between the plastic and the metal interface anyone know if this is fixable or even just reroute hoses and block off
|
12th Oct 2020 12:33 pm |
|
|
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 873
|
It could be the rubber o ring on the plastic elbows, tin between the two is a screw that secures the retaining plate
Just remember or take a picture or the rotation / angle the pipes sit Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
|
12th Oct 2020 6:43 pm |
|
|
riverblanche
Member Since: 31 Aug 2010
Location: retford'ish
Posts: 2229
|
Re: coolant coming from bottom of webasto |
|
Terryok wrote: even just reroute hoses and block off
Hi,
would try to fix it rather than this option, the FBH can be working quite a bit in the colder months and stop start traffic to keep the engine up to temp, its not just used as a cold start first thing of the day.
Transit! 2019
Gone D3 HSE 2008
Another Porsche Cayenne 2022
Gone Porsche Cayenne 2020
Gone RRS HSE Dynamic 2016
Gone RRS HSE LUX 2011
Gone RRS HSE 2006
Gone D3 SE 2.7 2008
gone D2 Td5 1999
I plan on living forever and so far so good !
Club DG Mclaren stuff
.
|
12th Oct 2020 6:57 pm |
|
|
Terryok
Member Since: 30 Jun 2018
Location: Kent
Posts: 6
|
Thank you will check tommorrow
|
12th Oct 2020 6:57 pm |
|
|