This happened to me. If you speak to Martin, he can make you a new pin with 6 inches of wire to put into the connector. Them just connect to old cable and shrink wrap it with heat gun.Craig.
Member Since: 02 Apr 2016
Location: Staffordshire
Posts: 19
Thanks , I would give it a go , however the wire has broken at the butt of the connector.
Sourcing one from a scrapper could be a good idea.. I see what Martin comes back with. 😉
19th Apr 2024 1:18 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
I can source the connector from LR for you if you wish, and build up a complete pigtail connector.06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
19th Apr 2024 2:17 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14190
As always Martin ur a life saver for so many people , massive respect
19th Apr 2024 3:01 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14190
DylansTrust wrote:
Thanks , I would give it a go , however the wire has broken at the butt of the connector.
Sourcing one from a scrapper could be a good idea.. I see what Martin comes back with. 😉
Ur so welcome , always a team effort , see that Martin as always has come to the rescue to supply a new connector with tails
Will then be so easy to do one wire at a time
If u don’t mind me suggesting put the landy into off-road height , remove fuse F26 from the engine bay and put some axle stands underneath the rear wheel seeing ur have u hands in there
Plse note that when u reinstall the fuse the D3 the suspension will drop down quite quickly
Hope that’s also useful to u
19th Apr 2024 3:05 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14190
Also found the rear valve block wiring for u as it tells u what colour wire goes in what PIN number but u won’t need if u cut back the wires one at a time
Click image to enlarge
Click image to enlarge
19th Apr 2024 3:13 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14190
Managed to find the connector PIN number diagram as well for u
Hope it’s also useful
Click image to enlarge
19th Apr 2024 3:18 pm
DylansTrust
Member Since: 02 Apr 2016
Location: Staffordshire
Posts: 19
Martin wrote:
I can source the connector from LR for you if you wish, and build up a complete pigtail connector.
Thanks Martin,
Do you know if the height sensor pins are the same size ?
I purchased the one below
Click image to enlarge
19th Apr 2024 3:51 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
No, totally different. You can see them both here:
YMI000950 is in the height sensor connector
YMI900480 is in the valve block connector06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
19th Apr 2024 4:41 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14190
DylansTrust wrote:
Martin wrote:
I can source the connector from LR for you if you wish, and build up a complete pigtail connector.
Thanks Martin,
Do you know if the height sensor pins are the same size ?
I purchased the one below
Click image to enlarge
Hope the above wiring diagrams etc are also useful to u
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
