Member Since: 02 Apr 2016
Location: Staffordshire
Posts: 19
gstuart wrote:
DylansTrust wrote:
Thanks , I would give it a go , however the wire has broken at the butt of the connector.
Sourcing one from a scrapper could be a good idea.. I see what Martin comes back with. 😉
Ur so welcome , always a team effort , see that Martin as always has come to the rescue to supply a new connector with tails
Will then be so easy to do one wire at a time
If u don’t mind me suggesting put the landy into off-road height , remove fuse F26 from the engine bay and put some axle stands underneath the rear wheel seeing ur have u hands in there
Plse note that when u reinstall the fuse the D3 the suspension will drop down quite quickly
Hope that’s also useful to u
Very useful mate. The upper NSR arm is being replaced at the same time, but if we don’t have any joy on the connector (over the weekend) then be using the info above .. 😉
19th Apr 2024 7:54 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14190
Ur so welcome and nice being able to pass it on so to speak from others that have also very kindly helped me in the past
Wish u all the best with the rear upper arms as they can sometimes be pigs to change , done mine and unfortunately had to cut them out , not wishing to try and teach u how to suck eggs but will need 4 x wheel alignment after
Can of course mark the eccentric bolts to get them back into the same position , I was amazed how nice it drove after getting the hunter 4 x wheel alignment done as I was unaware the fronts were also out
All the best for this weekend
20th Apr 2024 7:53 am
DylansTrust
Member Since: 02 Apr 2016
Location: Staffordshire
Posts: 19
Martin wrote:
No, totally different. You can see them both here:
YMI000950 is in the height sensor connector
YMI900480 is in the valve block connector
Hi guys. It’s been in for a few mot bits, but they couldn’t do the plug, as Martin said it is the wrong one.
Martin , I’m going to try and PM you.
22nd Apr 2024 7:47 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
I can supply these ready built now:
Click image to enlarge
To be added to the shop shortly but PM if needed sooner!06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
