steve the magpie
Member Since: 23 Jan 2009
Location: pontefract west yorkshire
Posts: 188
  
|
| any clues on changing suspention air compresor |
|
my air drier as cut its throat  but a kind man "big dave"  as offered me the bits to fix it  for a few beer tokens is there any tricks to changing the air drier i need to know first before i dig a big hole cos being a yorkshire man with the war cry " HOW MUCH"dont want main dealers scareing me  always up to somert usualy no good acording to swmbo
|
 21st Nov 2010 7:30 pm |
|
|
steve the magpie
Member Since: 23 Jan 2009
Location: pontefract west yorkshire
Posts: 188
|
sorted problem tried to fit condensor but found you have to remove the complete uint "inc mouting bracket" just for 1  screw ! there are 3 10mm bolts holding the mount to the car 2 at the bottom and 1 at top right in the corner of the mounting plenty of quater drive extentions and a knuckle sorted it once the the air pipes are removed by pressing in the round ferralls on the pump and gentley pulling the air pipes at the same time they just pop out then the unit is free of the car . remove the small screw then you can twist the condesor filter about quater of a turn to line up two small pegs "at 1end of the groove"on the filter then i used a small pry bar to move the filter off its mount carefull not to damage the o ring on the pump housing then refit the new filter to the pump then refit back onto the car. took me just short of 1hour started car and no more "wobbely disco light" hope this can help some one else with same problem always up to somert usualy no good acording to swmbo
|
| 25th Nov 2010 12:45 pm |
|
|
