Member Since: 08 Dec 2009
Location: Cumbria
Posts: 4
Changing from 7 pin to 13 pin
Just about to change 7 pin N & S electrics (factory fitted) to 13 pin electrics (just bought on ebay) to drag the new tintent - is the fused unit in the Land Rover trailer kit No. 4H22-15R555-AA common to both 7 pin and 13 pin sockets which will save me a little time in connecting up the 13 pin socket 4H22-15R555-CA?Grey Wanderer
11th Dec 2009 2:04 pm
PaulP
Member Since: 04 May 2007
Location: Barcelona
Posts: 4317
Not sure, but I think you'll have to change it anyway.....ISTR that the 13-pin kit only has one plug (behind the rear light) coming out of the fuse box compared to the double plugs used for connecting the 7-pin N and S plugs.
To be honest, it really is a 2 minute job to change this bit of the wiring kit over anyway 2006 Discovery 3 TDV6 SE AutoBuckingham Blue 2007 Golf GT DSG
11th Dec 2009 2:09 pm
Gizmek
Member Since: 08 Dec 2009
Location: Cumbria
Posts: 4
Thanks for that PaulP - just waiting for the sun to shine - it could be a long time!!!Grey Wanderer
Just did this change myself though I bought a new LR kit from TLO.
I left the old bit of wiring with the fuse block in the car as it was identical to the new one in the kit, right down to the 3 sockets that connect to the 3 plugs that are on the cable from the new 13-pin socket.Now an ex-D3 owner after 7 happy years. Miss the car but not the big bills
11th Dec 2009 2:48 pm
PaulP
Member Since: 04 May 2007
Location: Barcelona
Posts: 4317
Oops...
Thanks for that Albourneboy 2006 Discovery 3 TDV6 SE AutoBuckingham Blue 2007 Golf GT DSG
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum