jester 1
Member Since: 09 Jan 2010
Location: BOLTON
Posts: 3
  
|
please can anyone tell me how to load cds into my cd/radio player in my discovery 3 it will only let me put 1 in and it holds 6 ?
|
 9th Jan 2010 10:52 pm |
|
|
Stu
Member Since: 08 Feb 2009
Location: Hampshire
Posts: 2423
|
Press the preset button in CD mode for the disc you want to enter ie press 2 and then stick the next CD in. You use the preset buttons to choose which CD to play, or the voice control if you have it.
I think that's right - been a while since I changed mine! D3 HSE MY05 Auto
Expo Rack, Club MTR, LR Spots, A Bar, Light Guards, GNVP Sump Guard, GNVP Ladder, Cup Holders, RLD A Bar brackets. Disco3Club stickers, Aux power on Mod
|
| 9th Jan 2010 10:55 pm |
|
|
jester 1
Member Since: 09 Jan 2010
Location: BOLTON
Posts: 3
|
thanks il give it a try in the morning 
|
| 9th Jan 2010 11:03 pm |
|
|
DaveS
Member Since: 15 Aug 2009
Location: Weybridge
Posts: 241
|
It is possible to load all six CDs at once. The following description is from the manual which is available on this site somewhere.
To insert more than one disc, briefly press the CD mode button. Then press and hold the CD mode button. The information display will show ‘Loading All’, followed by ‘Please Wait’.
When the message ‘Insert Disc’ is displayed, the first disc can be presented to the player. The disc’s position number will be highlighted on the Information display screen both during and after loading.
This process is repeated until all six CD positions are occupied. If one or more of the disc positions is already occupied, that position will be skipped in the loading process.
Note: To stop the loading process for multiple discs, either press and hold the CD mode button or press the C button.
Note: If there is a problem with a disc that has been loaded (inserted upside down, wrong format etc.) ‘Disc Error’ will appear in the message display, and the disc in question will be ejected. If the problem is obvious, and can be corrected (disc upside down for example), then re-insert the disc in the correct manner. If it cannot be rectified, or the problem is not apparent, do not re-insert the disc.
|
| 10th Jan 2010 5:04 pm |
|
|
jester 1
Member Since: 09 Jan 2010
Location: BOLTON
Posts: 3
|
many thanks for that i have followed your instructions and it worked with no problems at all 
|
| 10th Jan 2010 11:04 pm |
|
|
