Member Since: 22 Sep 2010
Location: Notts.
Posts: 8243
Beware of latest v3 firmware failing.
Although firmware 3 has progressed it has one major failing IMHO, should you find yourself like me you can’t turn the ignition on for whatever reason your very expensive Iid tool WILL NOT WORK!It can when others can't,
It will when others won't,
It goes where others don't.
23rd Apr 2024 8:56 am
Bardley
Member Since: 02 May 2018
Location: Hertfordshire
Posts: 478
As a standalone thread, can you explain a little further?
Are you saying not to update the GAP tool?2011 MY D4 HSE
Previously 2001 D2 TD5, 1996 D1 300Tdi, 1985 90 2.2 petrol.
Bikes! KTM, BMW, British, Classics and others.
23rd Apr 2024 11:43 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8243
Yes, if for ANY reason you cannot switch your engine on which I can't at the moment the tool will not work, see my other post what's more you cannot go back to an older version of software which will work without switching the engine on, make a mockery of the SS button. It can when others can't,
It will when others won't,
It goes where others don't.
23rd Apr 2024 12:34 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20855
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8243
I can't switch Ignition on that is the fault I have, SS button not working, upgraded Iid tool to latest firmware version and first thing it says is "switch engine on".
Please see my other post.It can when others can't,
It will when others won't,
It goes where others don't.
Last edited by M3DPO on 24th Apr 2024 11:19 am. Edited 1 time in total
24th Apr 2024 11:02 am
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20855
Thats not the fault of the tool. No diag tool will work on the car without the ignition being on My D3 Build Thread
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8243
So how do I get the button to operate?-tried everything I can think of. What does the button operate? - solenoid, relay, module.
What's more why did the old firmware that I had on the Iid tool work and run when the on/off Switch did not work ?- I don't know what version as I haven't updated the Iid tool for a long time and it did not include the fuel tank senders, that's why I updated it and I can't revert back to it. It can when others can't,
It will when others won't,
It goes where others don't.
24th Apr 2024 11:21 am
Moo D3 Decade
Member Since: 13 Aug 2010
Location: UK
Posts: 14482
Why not reach out to GAP. I've always found them very helpful.D4 HSE EU6 (Known as Jeeves)
New Defender L663 110 SE (known as Noddy!) Sold
Sold Volvo XC90 R-Design (known as Basil)
Sold - D4 HSE (Known as Gerty)
No longer the Old Buses original owner
231,000 miles and counting
05 S manual owned from March 2005
D4 Face lifted
Still original injectors and turbo
V8 Front brakes
BAS Remap, Allisport Intercooler and deCat
EGRs blanked
T-Max split charge
Hanibal Expeedition rack
Prospeed ladder
Duratrac tyres
IID BT
BAS FBH control
24th Apr 2024 1:35 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8243
Good idea I’m on to it. :bow:although when I try to connect and the program states “switch ignition on” it tries to switch the ignition on automatically, a few seconds later another option pops up to “send email” to pat@gap this is followed by the program it uses to switch the engine on but it tries over and over until I exit the procedure and then click on send email, but I have had no response yet and will try and make contact direct. It can when others can't,
It will when others won't,
It goes where others don't.
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8243
New button fitted, all fuses checked and double checked, earth strap checked, brake light switch replaced, tank senders “A” and “B” checked for continuity under rear near side wheel arch, battery 13.5 volts tested on battery.
Interior lights, LR logo on screen, remote locks, radio, alarm, mirrors, hazards all work nothing else First sign something was wrong when fuel mileage registered “—-“ miles left and I knew there was 1/4 tank, switched engine off not started since, since put 5ltr in out of desperation.
So the big question is, why doesn’t the ignition switch on?- what stops it from switching on?- what does the stop/start switch operate?- relay, solenoid, module, ecm?It can when others can't,
It will when others won't,
It goes where others don't.
Last edited by M3DPO on 24th Apr 2024 6:32 pm. Edited 1 time in total
24th Apr 2024 5:52 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8243
Hardware wrote:
That WaxOil treatment is certainly saving you from any mileage-related corrosion.
Maybe not but it is used to being garaged at night not stuck out in all the elements and you don’t get the same respects from other drivers driving a Yetti as you do Discovery It can when others can't,
It will when others won't,
It goes where others don't.
24th Apr 2024 5:58 pm
defector
Member Since: 23 Feb 2009
Location: Greater Manchester
Posts: 1476
If its an auto, how about the interlock to prevent a start whilst in gear?
Ours is a D3 so little different to D4.
24th Apr 2024 7:22 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20855
Would still bring them ignition on, just wouldn't crank
What does the dash say when you press the button? Nothing at all, or does it say it can't find the key?My D3 Build Thread
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
WORK!
