defector
Member Since: 23 Feb 2009
Location: Greater Manchester
Posts: 1419
  
|
I recently changed my battery to a higher capacity 100AH / 900A Yuasa battery.
The voltage appears to run at about 13.7 - 14.0 volts which seems ok'ish.
Does the D3 have a BMS which i need to reset, or is that only D4.
I have looked on the IID but couldn't find any thing for BMS reset.
|
 7th Apr 2018 11:18 pm |
|
|
DN
D3 Decade
Member Since: 24 Jun 2006
Location: W.London.
Posts: 2294
 
|
BMS is for D4 only, not D3. That voltage (assuming with engine running) seems a little low. Mine is 14.2v to 14.8v, but that could be because my battery is not new.  D3 owned from new, P017 brake recall, BAS FBHIC, new FBH, LR013487 oil pump, new water pump. RRS front lower suspension arms. New suspension compressor/ relay. New Denso alternator. CuNifer rear brake pipes. New GKN rear propshaft. New HPFP belt & tensioner. New A/C Condenser.NO WARRANTY for many many years.
|
| 8th Apr 2018 12:15 am |
|
|
defector
Member Since: 23 Feb 2009
Location: Greater Manchester
Posts: 1419
|
Thanks, will check voltage with a proper multimeter.
Currently using a 'DSL' digital voltmeter.
|
| 8th Apr 2018 1:32 am |
|
|
