Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72797
You'd have thought black would be a better colour than yellow, unless that was only for the film. Also one miss with that hammer and the alloy is kerbed anyway!
Wouldn't you need to have the wheel rebalanced after fitting it?
24th Mar 2010 1:38 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
It's the same weight all roiund, so in theory it would be fine.
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
24th Mar 2010 1:40 pm
simon
Member Since: 11 Jan 2005
Location: Shropshire
Posts: 18296
Do they do LED ones ?
24th Mar 2010 1:42 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72797
Shhhhh, don't mention Saxos, passed one wrapped around a tree on road out of Grantown at just after 9 this morning. He'll need more than a bit of T-Cut to fix it!
24th Mar 2010 1:45 pm
Dave
Member Since: 08 Mar 2006
Location: North Yorkshire
Posts: 2462
Surely some with a ball bearing race to enable them to spin independently would also appeal 8)
Seriously though, for the Bimmers Audis etc these would be a good idea to counter the ultra low profile tyres not providing any protection, failing all else of course you could not park your wheel into the kerb in the first place Captain Nick Medhurst would ask:
"What is the first rule when overlanding?"
I would Reply:
"Duratrac"
24th Mar 2010 1:46 pm
Pelyma
Member Since: 06 Jan 2005
Location: Patching, Sussex
Posts: 15496
They've been talking about it on RRSDS3 TDV6 HSE - Silver with Alpaca (old one) Gone
DS3 TDV6 HSE- Silver with Alpaca (new one) Gone
D4 HSE Lux - Montalcino Red Gone
Porsche Cayenne V8 Diesel S
24th Mar 2010 1:55 pm
BHH
Member Since: 19 Jan 2010
Location: Co. Antrim, N. Ireland
Posts: 208
Similar idea here on a disco
&feature=related
Maybe worth looking into....
24th Mar 2010 1:58 pm
Renton
Member Since: 13 Jan 2009
Location: Somewhere in the middle
Posts: 1718
Nice solution, indeed!
Possible groupbuy?CLUB ILLEGAL CAR WASHERS
24th Mar 2010 2:05 pm
BHH
Member Since: 19 Jan 2010
Location: Co. Antrim, N. Ireland
Posts: 208
Renton,
Good idea - I'd def be up for a black set
24th Mar 2010 2:53 pm
SN
Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710
why don't people just learn to effin' drive properly Steve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)
24th Mar 2010 3:17 pm
AndrewS Tarquin of the Desert
Member Since: 06 May 2005
Location: Y...... because I can
Posts: 10438
Dam you SN thats what I was about to post In the Beginning there was nothing, which exploded.
24th Mar 2010 3:59 pm
DiscoShortie
Member Since: 02 Dec 2009
Location: Birmingham
Posts: 39
SN wrote:
why don't people just learn to effin' drive properly
They do, until the Mrs takes the car out and it comes back kerb'd lol
24th Mar 2010 4:04 pm
Alan G
Member Since: 15 Oct 2008
Location: Lanarkshire
Posts: 1372
DSL wrote:
You'd have thought black would be a better colour than yellow, unless that was only for the film. Also one miss with that hammer and the alloy is kerbed anyway!
Wouldn't you need to have the wheel rebalanced after fitting it?
Plenty of colours to choose from Derek and it looked like a composite or dead blow (shot filled) hammer he's using, so no rim damage.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum