Member Since: 27 Sep 2019
Location: London
Posts: 1
What are these 2 pieces circled in picture ?
I was reading prior to attempting to burp the air in my cooling system . I keep reading about the bleed valves - one on the bottle and one from the head . But I have also read about a valve with plastic top turned by fingers . Is this one of the 2 circled pieces in my pic ?
Any help appreciated.
[/img]
4th Nov 2019 10:14 pm
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 871
Green I believe is the low pressure fuel pipe bleed valve like a tyre valve and the red I think is the egr coolant pipe . When stood at the front like the photo at the front rhs of the engine just behind the top of the fan is another coolant bleed screw similar to the screw on the expansion tankMetal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
4th Nov 2019 11:00 pm
kels83
Member Since: 26 Aug 2010
Location: Texas
Posts: 11
On the petrol engine, my coolant bleeder valve is just behind the EGR valve. It's a small plastic T fitting that I've had to replace several times due to it cracking. My 2006 LR3 came with a black bleeder fitting with a black screw cap. The replacement parts (genuine LR) came with the same black plastic fitting, but with a brass screw cap.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum