Member Since: 20 Nov 2016
Location: Stourbridge
Posts: 401
10 minuets to update ccf?
As title along with the strange TPMS issue I have at the moment, it’s now taking 10 minutes to update the ccf file with my iid, used it 3 times over the last few days as my timed climate settings had reverted, it’s taking 10 minuets from starting the ignition off cycle to coming back on, the blue light is flashing away on the iid, this can’t be normal can it?Jaguar I-Pace HSE imminent.
Gone HSE with Flappy Paddles. IID BT tool. RLD Spare Protector, Altox GPS.
Member Since: 20 Nov 2016
Location: Stourbridge
Posts: 401
Tried to a few weeks ago, It said im at the latest version.Jaguar I-Pace HSE imminent.
Gone HSE with Flappy Paddles. IID BT tool. RLD Spare Protector, Altox GPS.
20th Nov 2018 9:46 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
20th Nov 2018 11:14 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8244
3 times over the last few days! - with or without battery back up?It can when others can't,
It will when others won't,
It goes where others don't.
21st Nov 2018 7:30 am
Jubbly
Member Since: 20 Nov 2016
Location: Stourbridge
Posts: 401
without, 12.6v start and 12.2 volt finish according to the IID tool and Altox.
first time was to check the tpms settings. I then restored settings from the iid tool.
second time was to enable timed climate as the restore has restored all my original settings and switched off my timed climate.
thrid time was I'd forgot to change heater from std to park heat.
will be a forth in a minute as it's reset my mpg readings back to standard so i just got over 32mpg on the school run.Jaguar I-Pace HSE imminent.
Gone HSE with Flappy Paddles. IID BT tool. RLD Spare Protector, Altox GPS.
21st Nov 2018 8:56 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73132
12.2v is pretty low. You could try it jump leaded to another running car, unless u have a charger with supply mode.
21st Nov 2018 9:04 am
Jubbly
Member Since: 20 Nov 2016
Location: Stourbridge
Posts: 401
Tried again with charger attached, made no difference. Still started at 11:34 finished writing at 11:43.
Updated iid tool even though it is already at latest version. Jaguar I-Pace HSE imminent.
Gone HSE with Flappy Paddles. IID BT tool. RLD Spare Protector, Altox GPS.
21st Nov 2018 11:44 am
Jubbly
Member Since: 20 Nov 2016
Location: Stourbridge
Posts: 401
All sorted now, I had relocated my port using an extension cable, must be an issue with the cable as ccf updates in seconds again direct into the obdc port.Jaguar I-Pace HSE imminent.
Gone HSE with Flappy Paddles. IID BT tool. RLD Spare Protector, Altox GPS.
25th Nov 2018 5:08 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8244
Poor port connection was the first thing Pat@gap diagnosed whenI had a problem, a good clean connection is essential It can when others can't,
It will when others won't,
It goes where others don't.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
